NEC Express5800 Series User Manual page 110

4-10 System Configuration
Advanced
Move the cursor onto "Advanced" to display the Advanced menu.
There is no configurable item on the Advanced menu screen below. Display each sub menu and
make settings on the sub menu screen. Select an option with the " " mark and press Enter to
display its submenu.
Main Advanced
Advanced Processor Configuration
I/O Device Configuration
Option ROM Configuration
Boot-time Diagnostic Screen: [Disabled]
HPET
F1 Help Select Item -/+ Change Values
Esc Exit Select Menu Enter Select Sub Menu F10 Save and Exit
See the table below for setup options on the screen.
Option
Boot-time
Diagnostic Screen
HPET
ftServer Setup
Security Server
[Disabled]
Parameter Description
[Disabled] Specify whether to display the Power On Self-Test (POST)
screen at start-up. If "Disabled" is selected, the NEC logo
Enabled
appears while POST is in progress. (To display POST check
results, press Esc.)
[Disabled] Specify whether or not to enable High Precision Event Timer
feature.
Enabled
Boot Exit
Advanced Processor
settings
F9 Setup Defaults
Item Specific Help
[ ]: factory-set