NEC Express5800 Series User Manual page 315

2.
Insert the "NEC EXPRESSBUILDER" CD-ROM into the DVD-ROM drive and run the
following command after starting Command Prompt.
DVD-ROM drive:\HAS\W2K3\HASSETUP\LAN\INSTALL.VBS
3.
Set a dual LAN configuration.
Refer to "DUAL LAN CONFIGURATION" on page 3-24.
Now the 1000BASE-T 1ch board set, 1000BASE-SX 1ch board set, or 1000BASE-T 2ch board
set is installed.
050-03109-000 SCSI Board
The lists of slots to install optional PCI boards

Refer to the table "List of option PCI boards and installable slots" on page 8-32.
Driver installation procedure

TIPS:
To perform this procedure, you have to log on the system as an Administrator or a member of the
Administrators group.
1.
Mount a SCSI board, and restart Windows Server 2003.
After the restart, "New Hardware is found" window is displayed and the driver is automatically
installed.
IMPORTANT:
If you are asked to reboot the system, click [Yes] and reboot the system.
Now the driver is applied.
System Upgrade 8-39