Controller Configuration
The following screen is displayed when "Controller Configuration" is selected in the menu.
Controller Configuration
Controller Interface Definitions
Runtime BIOS..........................................
BBS Support........................................... Device
POST Banner Display......................... Enabled
CTRL-A Message Display.................... Enabled
Physical Drives Display during POST......... Enabled
RAID Support................................... Disabled
Bootable CD-ROM/DVD-ROM support.... Enabled
See the following table for each item.
Item
Runtime BIOS
BBS Support
POST Banner
Display
Adaptec SAS/SATAController#0
<F6> - Reset to Controller Defaults
Parameter
[Enabled]
Disabled
Disabled:Scan bus
[Device]
Controller
[Enabled]
Disabled
Enabled
Description
Controls
the
BIOS
If [Enabled] is selected, the controller can be operated
as
a
boot
device
If [Disabled] is selected, other appropriate SAS
controllers operate as boot devices.
If the setting of BBS support is set to [Device], the
boot
device
connected
registered to the boot menu of system BIOS.
If BBS support is set to [Controller], only SAS
controllers are registered to the BIOS boot menu.
If [Enabled] is selected, Adaptec banner, the version,
and copyright are displayed.
If [Disabled] is selected, Adaptec banner, the version,
and copyright are not displayed.
System Configuration 4-37
status
at
the
by
SAS
controller
to
SAS
controllers
POST.
BIOS.
is