NEC Express5800 Series User Manual page 65

3-4 Windows Setup and Operation
Screen
[Left pane]
The tree shows disks inserted to the internal slots and virtual disks (RDR Virtual Disks)
created by the RDR utility. Right-click a disk on the tree to display the menu for setting
RDR. By looking at the tree, you can determine which disk corresponds to disk in Windows'
[Disk Management] and if disk is mirror using the RDR utility.
For example, in the case of the disk highlighted in the figure above:
Disk (Harddisk1 LUN2 PLEX0)
(1) Corresponds to Windows Disk Management; in this example, this disk is the Disk1
in Windows Disk Management.
(2) Corresponds to the virtual disk created by the RDR utility. In this example, the disk
part of the RDR Virtual Disk 2.
(3) This section appears only for disks with RDR setting.
[Right pane]
The properties of the disk selected in the left pane is shown.
In the figure above, the properties of the disk inserted to the Slot 2 of the PCI module 0.
IMPORTANT:
The RDR utility display is not automatically update. The display can be manually
updated by either clicking [Action] and click [Refresh] from the menu or pressing
F5.
Making disks duplex by RDR
The following describes the procedure to set duplex configuration to disks by RDR.
In this example, the disks of the Slot 2 of the PCI modules 0 and 1 are duplexed.
(1) (2) (3)