NEC Express5800 Series User Manual page 211

Procedure in ft server utility
1.
Save the image data of the update firmware in a desired directory of the NEC
Express5800/320Fc series.
Save the image data on the sever and write down the path to the directory for use later.
2.
Select the target component with the ft server utility.
3.
Check the current state of the target component with the LEDs. If the component is
operating, stop the component.
4.
Click the [Firmware...] button for the target component.
Sample screen of ft server utility
5.
Select [Specify new firmware for update], enter the directory in which the updated
firmware specified in the input box in step 1 is saved, and click the [Activate] button.
Perform the firmware update.
6.
Check the update result with the event log.
Installing and Using Utilities 5-65
[CPU Module]