Step 2: Prepare for Express Setup
Before install LINUX server, be sure to do the following. If these preparations are not done, setup
cannot be performed properly.
Prepare NEC Express5800/ft series
With the power of NEC Express5800/ft series off, follow the steps below:
Prepare NEC Express5800/ft series.
1.
Follow the instructions below to prepare.
•
Remove all the optional PCI boards and peripheral equipments.
•
Remove all the LAN cables.
Prepare the installation from the CPU/IO module 0.
2.
The location of the parts required for operations and check are shown below:
CPU/IO module 0
CPU/IO module 0
Power LED
CPU/IO module 0
Status LED
CPU/IO module 1
Power LED
CPU/IO module 1
Status LED
CPU/IO module 1
CPU/IO module 0
POWER switch
Front side of device
CPU/IO module 1
Power switch
Linux Setup 4-5
CPU/IO module 0
DISK ACCSSS LED
CPU/IO module 1
DISK ACCESS LED