4-32 Linux Setup
Execute "Configurations" in ftdiskadm and select "DISK_SCRUBBING_INTERVAL"
1.
from the setting menu.
# ftdiskadm
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions (RAID1)
7 Make Striping Array
8 Delete Striping Array
c Configurations
q Quit
Command: c <<< Enter "c" to display the setting menu. >>>
[Configurations]
1 FTDISKADM_MORE
2 DISK_SCRUBBING_INTERVAL = 22 4 * * 0
*
Which
On the following screen, input a value and press ENTER.
2.
DISK_SCRUBBING_INTERVAL =
The followings are 3 options when you enter the value.
a) To stop working this function
Enter "off".
b) To start working this function (Available only while stopping)
Enter "on".
c) To set time cycle of this function
Enter the schedule in the same format as the cron task schedule field.
As for the cron task schedule field, run the following command and refer to the
section 5 (file format) of the crontab.
# man -S 5 crontab
The main menu of ftdiskadm appears. Enter "q" in Command to end ftdiskadm.
3.
= more -17
one?
2
<<<
(RAID1)
(RAID1+0)
(RAID1+0)
Enter
"2"
to
DISK_SCRUBBING_INTERVAL. >>>
set
the
value
of