NEC Express5800/320Fd-LR User Manual page 76

4-16 Linux Setup
system. You can check the swap usage by free command while running the
system. You need to consider expanding the swap partition or adding
memory when the swap usage remains high all the time.
The disk pair of software RAID must be configured in combination of corresponding
slot numbers. The corresponding slot numbers are as follows.
See the above CHECK column for each device name.
Slot 1 of CPU/IO module 0 and slot 1 of CPU/IO module 1
Slot 2 of CPU/IO module 0 and slot 2 of CPU/IO module 1
Slot 3 of CPU/IO module 0 and slot 3 of CPU/IO module 1
Configure all partitions (including SWAP partition) with software RAID
(LEVEL=1, number of disks=2, number of spare=0).
Ensure to create /var/crash partition, as ft Server Control Software requires
exclusive one for the dump.
IMPORTANT:
The following packages are required for ft Server Control Software to function.
alsa-lib-1.0.14-1.rc4.el5.x86_64.rpm
bash-3.2-21.el5.x86_64.rpm
curl-7.15.5-2.el5.x86_64.rpm
e2fsprogs-libs-1.39-15.el5.x86_64.rpm
expat-1.95.8-8.2.1.x86_64.rpm
glibc-2.5-24.x86_64.rpm
gcc-4.1.2-42.el5.x86_64.rpm
kernel-2.6.18-92.el5.x86_64.rpm
kernel-devel-2.6.18-92.el5.x86_64.rpm
krb5-libs-1.6.1-25.el5.x86_64.rpm
jakarta-commons-codec-1.3-7jpp.2.x86_64.rpm
java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64.rpm
kexec-tools-1.102pre-21.el5.x86_64.rpm
libgcj-4.1.2-42.el5.x86_64.rpm
libidn-0.6.5-1.1.x86_64.rpm
libX11-1.0.3-9.el5.x86_64.rpm