Step 5: Post Os Install Settings - NEC Express5800/320Fd-LR User Manual

4-18 Linux Setup

Step 5: Post OS Install Settings

Initial Configuration Script
Run the initial configuration script after installing Red Hat Enterprise Linux Advanced Platform 5.2.
Ensure to run this script, as this makes various settings for a stable OS operation.
For this operation, the server-accessory NEC EXPRESSBUILDER DVD is required.
Applying the Initial Configuration Script
Apply the initial setup script by the below procedure.
TIPS:
The below procedure describes the mount point of the optical disk drive as
"/mnt". If the mount target differs, replace this accordingly.
In order to activate the initial setup, OS restart is required; however,
the procedure five here can be omitted, as there is a OS reboot on
the Step 6.
Set the NEC EXPRESSBUILDER DVD on the optical disk dive.
1.
Enter the command described below and mount the DVD.
2.
#mount/dev/hda/mnt
Apply the initial setup script with the below script.
3.
#/mnt/001/lnx/fysys/nec_setup.sh
Enter the below command and unload the NEC EXPRESSBUILDER DVD from the optical
4.
disk drive.
#eject
Restart the system with the below command.
5.
#reboot