Fujitsu ETERNUS DX80 S2 User Manual page 126

Appendix A Event Notification Message List
A.2 Message List
Event type
code
Suu
P DAS 00
SSuu
P DB 00
●
When the event type is "M"
The following messages are sent when an event that requires maintenance occurs:
Event type
code
MMPP
M 0732
M 13CE0001
M 13CE0002
M 13CE0003
M 13CE0004
M 13CE0005
M 13CE0006
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
Trap
TrapItemID Sensor
No.
Info
uu
2 DA00 00 -
uu
2 DB00 00 -
SNMP Trap
Trap
Trap
Maintenance
No.
Info
MMPP
7 0732 Remote Copy Path (CM#
Disconnection of a REC path between cabinets is detected.
MM
: CA module ID
PP
: 00 or 01
xx
: CM number
yy
: CA slot number (0 – 1)
zz
: Port number (0 – 1)
7 13CE0001 Error session was detected. (Local:
Errors were detected in the copy sessions.
xxxxx
7 13CE0002 Foreseen error session was detected. (Local:
Remote: xxxxx
Errors were detected in the copy sessions during suspension.
xxxxx
7 13CE0003 Halt session was detected. (Remote:
The copy sessions are in halt status.
xxxxx
7 13CE0004 Error session was cleared.
Errors in the copy sessions were cleared. The copy sessions
are in normal status.
7 13CE0005 Foreseen error session was cleared.
Errors during suspension in the copy sessions were cleared.
The copy sessions are in normal status.
7 13CE0006 Halt session was cleared.
Halt status in the copy session was removed. The copy ses-
sionsares in normal status.
126
Copyright 2013 FUJITSU LIMITED
Upper: Message
Lower: Description
DE Exhaust temperature sensor DE#uu Fault
Exhaust temperature error (sensor failure) is
detected in CE or DE.
SS : Component subtype
uu : DE-ID ("00" for a controller enclosure)
DE Intake temperature sensor DE#
Intake temperature error (sensor failure) is
detected in CE or DE.
SS
: Component subtype
uu
: DE-ID ("00" for a controller enclosure)
Upper: Message
Lower: Description
xx yy zz
CA# PORT# ) Not Available
xxxxx
Remote:
: Number of copy sessions in error status
xxxxx
)
: Number of copy sessions in error status during
suspension
xxxxx
)
: Number of copy sessions that are halted
Remarks
These messages are
notified when "Parts
Error" is enabled for
Error Severity Level in
the event notification
setting.
uu
Fault
They are not notified
during maintenance
operations.
Remarks
This message is noti-
fied when "Remote
Path Error" is enabled
for Error Severity
Level in the event
notification setting.
This is not notified
during maintenance
operations.
xxxxx
) These messages are
notified when "Copy
Session Error" is
enabled for Error
Severity Level in the
event notification set-
ting.
They are not notified
during maintenance
operations.
P3AM-4842-12ENZ0