Fujitsu ETERNUS DX80 S2 User Manual page 180

Appendix B Audit Log List
Event code
020E000C
020E000D
020F0001
020F0002
020F0003
020F0004
020F0005
020F0006
02100001
02100002
02100003
02100004
02100005
02100006
02100007
02100008
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Export Config Information
Detail information is not displayed.
Change Assigned CM
Detail information is not displayed.
Register Controller Firmware
$a $b
[Generation= Version= ]
Start CFD
$a
[Version= ]
Start CFL
$a
[Version= ]
Register Disk Firmware
$a $b
[Vendor= Product= Revision=
Update Disk Firmware
[Product= $a Revision= $b Disk=
$d
Application_Type= ]
Delete Disk Firmware
$a
[Product= ]
Clear Log
Detail information is not displayed.
Clear Panic Dump
Detail information is not displayed.
Apply Config Information
$a $b
[Mode= Generation= File=
Clear Disk Error
$a
[Disk= ]
Delete Bad Data Info
$a
[No= ]
Export Panic Dump
Detail information is not displayed.
Export Log
$a
[Customer_Info= ]
Export Pinned Data
Detail information is not displayed.
Copyright 2013 FUJITSU LIMITED
The configuration information is exported.
The assigned CM is changed.
The controller firmware is registered.
$a
: Generation (1 – 4)
$b
: Firmware version (VxxLxx-xxxx)
Application of the controller firmware (enabled at
the next power cycle) is started.
$a
: Firmware version (VxxLxx-xxxx, none)
Changing of the current controller firmware is
started.
$a
: Firmware version (VxxLxx-xxxx, none)
The disk firmware is registered.
$a : Vender ID
$c
]
$b
: Product ID
$c
: Firmware version
The disk firmware is applied.
$a
: Product ID
$c
$b
: Firmware version
$c
: Drive (DE-ID + Slot number (example:
0000, 0001, 0002))
$d : Apply Mode (Offline, Online)
The disk firmware is deleted.
$a
: Product ID
The log is deleted.
The panic dump is deleted.
The configuration information is applied.
$a
: Apply Mode (Initialize, Restore)
$c
]
$b
: Backup file to be applied (1 – 4)
$c
: File to be applied (Latest, One-before,
Two-before)
The drive error is deleted.
$a
: Drive (example: 0000, 0001, 0002, 1000,
1001..., All)
The bad data information is deleted.
$a
: Volume number
The panic dump file is exported.
The log file is exported.
$a
: Customer Information (Enable, Disable)
The pinned data is exported.
180
Description
P3AM-4842-12ENZ0