Additional Information; Symbols Used In This Manual - Fujitsu ETERNUS DX80 S2 User Manual

About this Manual
How Warnings are Presented in this Manual
A message is written beside the symbol indicating the caution level. This message is marked with a vertical
ribbon in the left margin, to distinguish this warning from ordinary descriptions.
An example is shown here.
Example Warning

Additional Information

Symbols Used in This Manual

The following is a symbol used throughout this manual:
Abbreviations Used in This Manual
• "ETERNUS DX Disk storage system" refers to the DX80 S2/DX90 S2 Disk storage system.
• "CA" refers to a host interface module that is used in an ETERNUS DX Disk storage system to connect to a
server.
• "Host Bus Adapter (HBA)" refers to the interface module that is normally used by the server to connect to
ETERNUS DX Disk storage systems.
An "FC card", "LAN card", "Network Interface Card (NIC)", "Converged Network Adapter (CNA)", or "SAS card"
may be used instead, depending on the server and interface.
• Trademark symbols such as ™ and ® are omitted in this document.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Warning Level Indicator
Warning Type Indicator
Warning Details
To avoid damaging the ETERNUS DX80 S2/DX90 S2
Disk storage system, pay attention to the following points when cleaning
the ETERNUS DX80 S2/DX90 S2 Disk storage system:
- Make sure to disconnect the power when cleaning.
- Be careful that no liquid seeps into the ETERNUS DX80 S2/DX90 S2
Disk storage system when using cleaners, etc.
- Do not use alcohol or other solvents to clean
the ETERNUS DX80 S2/DX90 S2 Disk storage system.
Warning Layout Ribbon
Functions and know how which can be useful when setting up or operating the
ETERNUS DX80 S2/DX90 S2 Disk storage system.
6
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0