Fujitsu ETERNUS DX80 S2 User Manual page 150

Appendix A Event Notification Message List
A.2 Message List
Sense code
SK ASC
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F1
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
04 F2
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
ASCQ
01 CM is disconnected.
0B CM memory is disconnected.
0C CM BUD is disconnected.
0D CM FAN is disconnected.
10 CA is disconnected.
11 CA Port is disconnected.
17 CA SFP+ is disconnected.
19 CA SFP+ is disconnected.
1A CA SFP is disconnected.
1C CA SFP+ is disconnected.
1D CA SFP+ is disconnected.
1E Copper CA SFP+ is disconnected.
1F CA SFP is disconnected due to an SFP type that cannot be
recognized.
2A CM QSFP is disconnected.
80 3.5" HDD is disconnected.
81 2.5" HDD is disconnected.
84 3.5" SSD is disconnected.
85 2.5" SSD is disconnected.
88 Drive is disconnected because an error occurred during the
Write check of the disk patrol.
90 IOM is disconnected.
91 IOM Port is disconnected.
9A IOM QSFP is disconnected.
D2 DPSU is disconnected.
DA CE or DE exhaust temperature error is detected.
DB CE or DE intake temperature error (sensor failure) is
detected.
02 CM DMA Port is disconnected.
03 CM BIOS is disconnected.
04 CM RTC is disconnected.
05 CM NVRAM is disconnected.
06 CM EXP is disconnected.
08 CM DI Port is disconnected.
09 CM EXP IN port is disconnected.
0A CM EXP Out port is disconnected.
0E CM NAND Controller is disconnected.
0F CM SCU is disconnected.
11 CA port is disconnected.
21 CM FPGA is disconnected.
22 CM LAN Port is disconnected.
Copyright 2013 FUJITSU LIMITED
Description
150
Remarks
These sense codes are notified when
"Parts Error" is enabled for Error Severity
Level in the event notification setting.
They are not notified during
maintenance operations.
These sense codes are notified when
"Disk Error" is enabled for Error Severity
Level in the event notification setting.
They are not notified during
maintenance operations.
These sense codes are notified when
"Parts Error" is enabled for Error Severity
Level in the event notification setting.
They are not notified during
maintenance operations.
This sense code is notified when
"Temperature Error" or "Parts Error" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during maintenance
operations.
These sense codes are notified when
"Parts Error" is enabled for Error Severity
Level in the event notification setting.
They are not notified during
maintenance operations.
P3AM-4842-12ENZ0