Fujitsu ETERNUS DX80 S2 User Manual page 92

Chapter 5 Maintaining Optional Products
5.4 Installing Long Wave SFP+ Modules (16Gbit/s)
10
If a wrist strap is used, remove the wrist strap.
11
Turn on the ETERNUS DX Disk storage system.
Refer to
system.
12
Check that the LINK/FAULT LED for the FC port on the replaced Long wave SFP+ module
(16Gbit/s) turns off or lights up green.
13
Start ETERNUS Web GUI to check the status of the newly added Long wave SFP+ module
(16Gbit/s).
On the Internal Parts information in the [Channel Adapter Details] screen of ETERNUS Web GUI, check
that the FC port status is Normal and the SFP type is changed to "16G SFP+(SMF)". In addition, confirm
that all of the other components are in normal status.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
"2.1.3 Powering On" (page 36)
Copyright 2013 FUJITSU LIMITED
for details on how to turn on the ETERNUS DX Disk storage
92
End of procedure
P3AM-4842-12ENZ0