2.2.4 UNAUTHORIZED MODIFICATIONS
Any modification made without the authorization of Komatsu Utility can involve hazards.
Before making a modification, consult your Komatsu Utility Dealer. Komatsu Utility declines any responsibility
for injuries or damage caused by unauthorized modifications.
2.2.5 LEAVING THE OPERATOR'S SEAT
When leaving the operator's seat, even if temporarily, make
sure that the machine is in a safe position. (See "2.4.13 PARK-
ING THE MACHINE").
Before leaving the operator's seat, carry out the following oper-
ations in the sequence indicated below:
1 - Rest the equipment onto the ground.
2 - Connect the safety devices of the boom swing, optional
equipment and upper structure rotation controls.
3 - Lock the equipment control by shifting the safety device le-
ver to the lock position.
4 - Stop the engine (See "3.8 STOPPING THE ENGINE").
If you have to go so far away that you will not be able to see the
machine, extract the ignition key.
RYA11740
GENERAL PRECAUTIONS
RWA04980
RWA08660
RWA08670
29