Parking On Slopes - Komatsu PC27R-8 Operation & Maintenance Manual

3.7.2 PARKING ON SLOPES

DANGER
The movement of the machine when the operator is not on
board may cause serious accidents and even death; to
prevent this, carry out the operations described below.
Park on slopes only when it is absolutely necessary.
Park only with the bucket directed downwards.
1 - Park the machine with the bucket directed downwards and
resting against an obstacle.
If this is not possible due to the absence of natural obstacles,
rotate the bucket in the dumping position and thrust the teeth
into the ground.
2 - Lower the blade to the ground.
3 - Engage the safety lock of the boom swing control, of the op-
tional equipment control and of the upper structure rotation
and shift the safety device lever to the lock position.
4 - Stop the engine following the procedure indicated in para-
graph "3.8 STOPPING THE ENGINE".
5 - Leave the driving position using the tracks and the handles.
6 - Put wedges under the tracks.
7 - Refuel, taking the necessary precautions.
8 - Remove the ignition key and lock the cab, if provided.
PARKING THE MACHINE
RWA07010
RWA09000
RYA11740
RWA02000
97