Table of Contents
Advertisement
2.8 PRECAUTIONS FOR MAINTENANCE
2.8.1 WARNING PLATES
Before starting any maintenance operation, position the ma-
chine on a firm and level surface, rest the equipment onto the
ground, engage the safety locks of either the equipment and
the controls and stop the engine.
If another person starts the engine and operates the control le-
vers while the operator is providing for service, this may result
in serious injuries or even death.
To avoid these risks, always attach warning plates to the con-
trol levers and to the ignition key before performing any main-
tenance operation; if necessary, attach additional warning tags
also around the machine and in particular on the cab door
handles.
2.8.2 TOOLS
Use only the tools provided with the machine and high-quality
tools suitable for the tasks to be performed.
Do not use worn, damaged, low-quality tools or tools that are
not suitable for the tasks to be performed, in order to avoid any
personal injury.
After use, always clean the tools carefully and put them in the
appropriate compartment (1) positioned inside the seat sup-
port.
2.8.3 PERSONNEL
Only authorized and duly trained personnel can service and repair the machine; additional precautions must be
taken when grinding, welding and using a sledge hammer or heavy hammers.
When assemblying the equipment or cylinder connection pins, use wooden, plastic or in any case not exces-
sively hard tools to check the centering of the holes.
Do not use your fingers, since you run the risk of cutting them.
PRECAUTIONS FOR MAINTENANCE
DO NOT
START
ENGINE
1
RYA12300
RWA01210
RWA01310
45
- Quick Links:
- Warning Lights
Hide quick links:
Advertisement
Table of Contents
