JVC VN-H37U Instructions Manual page 109

A
HTTP Port You can change the port number to be used when the client computer accesses
to the camera via HTTP.
Specify the same value as the parameter being set on the camera's Protocol
Page. (A Page 61)
[Factory default: 80]
B
JPEG Frame Sets a frame rate for image acquisition by the viewer.
A high frame rate increases the amount of data processed by the computer
Rate
where the viewer is running.
[Set values: 30fps, 15fps, 10fps, 7.5fps, 6fps, 5fps, 3fps, 2fps, 1fps,
Memo:
1/2fps, 1/3fps, 1/5fps, 1/10fps, 1/15fps,1/20fps, 1/30fps, 1/60fps]
● Set the JPEG frame rate so that the CPU load of the computer does not
exceed 80%. If the CPU load is too high, the computer may not operate
normally.
● The highest frame rate for images is the camera's encoding setting (A Page
26, Framerate value).
109