JVC VN-H37U Instructions Manual page 24

Internet Explorer Setting
Settings (continued)
Camera Page (continued)
L
Day/Night
(VN-H37U/H57U/
H257U/H237VPU/
H257VPU/
H157WPU only)
Color
Color
Average: Peak
Black & White
Black & White
Average: Peak
Auto Low
Auto Mid
Auto High
24
Sets video to Black & White mode. Also allows you to select from among 3
levels for automatically activating Black & White mode in low-light
conditions.
[Set values: Color, Black & White, Auto Low, Auto Mid, Auto High]
If you select AF performance in conjunction with switching modes, AF is
performed when you switch between modes. (VN-H57 only)
Memo:
● The mechanical sound of the infrared filter insertion/removal can be
heard when the mode switches.
● While the mechanical sound can be heard, audio streamed from the
camera is muted. (VN-H257U, VN-H257VPU only)
● If you set "Auto Low", "Auto Mid", or "Auto High", the camera immediately
switches modes when the set amount of illumination is detected.
Keeps color mode activated at all times.
The color mode peak photometry rate is set as a ratio of the AVERAGE
value to the PEAK value.
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]
Keeps Black & White mode activated at all times.
The Black & White mode peak photometry rate is set as a ratio of the
AVERAGE value to the PEAK value.
[Set values: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5]
Switches to Black & White mode when the subject's signal level has a low
level of brightness.
Switches to Black & White mode when the subject's signal level has a
medium level brightness.
Switches to Black & White mode when the subject's signal level has a high
level of brightness.
* The [Set values] in bold letters are factory defaults.