Audio Page - JVC VN-H37U Instructions Manual

Audio Page

(These features are not available on VN-H37U/H137U/H237U/H237VPU.)
This page sets audio parameters.
This page can be used during access using AadminB or AoperatorB.
● Click [Advanced Settings] to display the setting menu.
● Click [Audio].
● Press the [OK] button to enable the new settings.
Click [Advanced Settings] and [Audio].
Audio
A
Communicate
B
Mike Gain
C
Mike Power
Supply
Sets the audio communication protocol.
When set to Half Duplex, audio sent from the camera to a computer is muted
while audio is being sent from the computer to the camera.
When set to Full Duplex, audio can be sent from a computer to the camera
while audio is also being sent from the camera to the computer.
[Set values: Half Duplex, Full Duplex]
Memo:
● When set to Full Duplex, audio sent from a computer to the camera with an
external microphone attached may return to the computer via the
microphone, resulting in an echo. In this case, use the Half Duplex setting.
Sets the gain for an external microphone connected to the camera.
[Set values: 0 dB, 20 dB, 26 dB, 32 dB, AGC]
Sets the power supply for an external microphone connected to the camera.
[Set values: ON, OFF]
* The [Set values] in bold letters are factory defaults.
A
B
C
D
33