JVC VN-H37U Instructions Manual page 44

Internet Explorer Setting
Settings (continued)
Storage Page (continued)
G
Constant
Encoder
Interval
File Naming
Sunday to Saturday
H
Alarm
Encoder
44
Sets the continuous recording.
Selects an Encoder for continuous recording.
Memo:
● You can select an Encoder No. for JPEG file encoding.
Sets a recording interval by seconds.
[Set values: 1 to 65535] sec
You can select any of three (3) formats of recording file names.
If you select AAutoB, a file name is created based on the year,
month, day, hours, minutes, seconds, and a number.
Example: 20111114161032-001-2.jpg
If you select AManual1B, a file name is created based on the User-
Defined-String which is added by year, month, day, hours,
minutes and seconds.
Example: Camera1_20111114161032001.jpg
If you select AManual2B, a file name is created based on the User-
Defined-String only.
Example: Camera1.jpg
[Set values: Auto, Manual1, Manual2]
Sets the start and end time of recording for each day of week.
[Set values: Unmask All, Mask All, Unmask Span, Mask Span]
If you have selected ASpecify the time period for invoking the actionB
or ASpecify to stop the actionB, you must set the time period.
[Set values: 00H00M-24H00M]
Sets alarm recording.
Sets an encoder for alarm recording and a JPEG frame rate.
[Set values: 5 fps, 3 fps, 2 fps, 1 fps]
Memo:
● You can select an Encoder No. for JPEG.
● The frame rates that can be set vary depending on the
encoding settings.
* The [Set values] in bold letters are factory defaults.