JVC VN-H37U Instructions Manual page 34

Internet Explorer Setting
Settings (continued)
Audio Page (continued)
Upload
D
Audio File
No.1 - No.5
34
Registers an audio file of the output from the camera's audio output cable or
connector when the alarm is activated.
To output the registered audio
● Create a file on a computer with the following specifications, and
register it to the camera.
File format WAV file format
Encoding method Linear PCM
Sampling frequency 8 kHz
Quantization bit 16 bit
Monaural
Maximum size 10 seconds (cumulative, for playback files 1 to 5)
● Set [Action] on the Alarm Page to "Play Audio" (A Page 36)
Note:
● If you activate the Speech functions of the Built-in Viewer during audio
file playback, playback of the audio file will stop.
● Playback of an audio file cannot be performed while the Built-in
Viewer's Speech functions are active.
Click the [Browse] button to display the file selection screen, and select the
audio file that you created.
Click the [Upload] button to register the selected audio file to the camera.
Click the [Delete] button to delete the audio file registered to the camera.
Click the [Play] button to play the audio file registered to the camera, and output
it from the camera's audio output cable or connector.
Press the [Stop] button to stop playback of the audio file.
Memo:
● WAV files can be recorded and edited using Sound Recorder in Windows or
other compatible audio processing tool.