JVC VN-H37U Instructions Manual page 77

When you select "Night Focus Offset" in [B Adjust Mode], the camera automatically enters Black
&White mode and Focus Assist mode. Adjust the offset value in a B&W mode environment to achieve
focus.
E
Offset
When you select "Back Focus Position Initialize" in [B Adjust Mode], the camera automatically enters
color mode.
F
Back Focus
Position Initialize
(VN-H57U only)
When using this function and the offset is set to other than "0", the focus is
automatically moved by the offset amount when you enter B&W mode.
Note:
● Before performing Night Focus Offset, make sure to perform Day Focus
Adjust.
● Depending on the shooting environment, the focus may not be set to the
optimal position.
● When the night focus offset is set to other than "0", the motor emits noise
when you switch between color and black/white.
Click the [Execute] button to initialize the back focus position.
Wait for several seconds until the status becomes "Execute". After
initializing, perform rough adjustment of the camera's lens focus again.
Note:
● During initialization, a large gear sound may be emitted. This is not a
malfunction.
E
F
77