Sharp IV-S30 User Manual page 160

Distance and Angle Measurement
Continued from the previous page
Return to the MAIN OPS MENU.
Pressing the TRG/BRT key will start a measurement manually.
- Select "CHG-RST" on the menu bar, and change the result using the up and down keys.
[Display of the
measured results]
Final evaluation result
Measuring time
Measurement program number
Mesurement object
Distance of distance number 00
"
"
"
"
"
"
"
(Number of pixels)
*Areas will not be displayed for
unspecified registration numbers.
- The following are some examples of other displays.
- Select "CHG-REG" on the menu bar, and change the objects to be measured using the up and down keys.
Mesurement object
Angle of angle number
"
"
"
"
"
"
"
14
Mesurement object
Angle of auxiliary number
"
"
"
"
"
"
"
Example of the results displayed for a distance measurement
(TYPE00)
OK
MEAS XXXXms 1999-08-01 10:30
MEASURE 0 CAM1 POSI-DEVIATION
MXR
00:100.0 OK
01:100.0 OK
01
02:050.0 OK
02
03:360.0 OK
03
04:250.0 OK
04
05:
05
06:
06
07:
07
X0~7
CHG-MEA CHG-REG CHG-RST CHG-C1
OPS-CND MEA-CND SYS-CND CHG-TYPE NEXT-NG RE-EXAM-NG MANL-MEAS
Example of the displayed of angle results
ANGL
00 00: 080.0 OK
01 01: 070.0 OK
02 02: 050.0 OK
03 03: 088.2 OK
04 04: 00 6.5 OK
05 05:
06 06:
07
07:
Example of the displayed of auxiliary results
AUX
00 00: (259.0, 178.0) OK
01: (466.0, 178.0) OK
01
02 02: (361.0, 228.0) OK
03 03: (132.0, 298.0) OK
04: (362.5, 178.0) OK
04
05:
05
06 06:
07 07:
Y0~7 READY
CHG-C2 CHG-EVAL CUSTOM-MNU
14-6
F.IMG C1 L
VX.X