Setting The System Time - Sharp IV-S30 User Manual

[4] Setting the system time (IV-S32M/S33M)
When the IV-S32M/S33M is used, set the time displayed on the monitor. This setting is available only
the IV-S32M.
Set the time on the "8TIME" line of the [SYSTEM COND] menu.
Ë Ë Ë Ë Ë Operating procedure
On the MAIN OPS MENU, move the cursor to the "SYS-CND" item, and press the SET key.
[SYSTEM COND]
1I/O CONDITIONS (TO NEXT SUB-MENU)
7GAIN-OFFSET
8TIME
9CAMERA TYPE (TO NEXT SUB-MENU)
1
OPS-MENU SAVE LOCK
1. Move the cursor to the "8TIME" item using the up and down keys, and press the SET key.
2. Move the cursor to "SEC.," "MIN.," "D," "M," and "Y" using the left and right keys, and enter the
correct value at each location using the up and down keys.
Y = 1999 to 2098
M = 01 to 12
D = 01 to 31
H = 00 to 23
MIN. = 00 to 59
3. Press the SET key. The time will be set and the system will start using the new time.
Setting the Operating and System Conditions
(TO NEXT SUB-MENU)
2000Y 10M 05D 18H 56M
2
2-17
2