Sequential Repair Adjustment Program; Function; How To Start The Program - Epson Stylus PHOTO 890 Service Manual

EPSON Stylus Photo 890/1280/1290

5.4 Sequential Repair Adjustment Program

This program is common for both Stylus Photo 890 and Stylus Photo 1290.
NOTE: In this section, Stylus Photo 890 program windows are used as examples.

5.4.1 Function

In this section, the sequential operations needs to be done are explained. This service
program provides appropriate adjustment orders for repair, and the following
adjustment items are included:
n
Printhead Removal
n
Printhead Replacement
n
Main Board Replacement
n
Carriage Unit Replacement/Removal
n
CR Motor Replacement
n
Printer Mechanism Replacement
n
Waste Ink Pad Replacement
n
Clogged Nozzle Recovery
ADJUSTMENT

5.4.1.1 How to start the program

1. Start the program and input all the required information on the initial window.
Make sure to chose Sequential Repair Adjustment Program for Program Type.
(See 5.2.4.1"Adjusting Program Initial Setting" on page -128)
2. Select a repair item and click OK. The main menu appears.
Figure 5-63. sequential Repair Adjustment Program Main Menu
Sequential Repair Adjustment Program
Figure 5-62. Program Type Selection
Revision C
149