EPSON Stylus Photo 890/1280/1290
4.2.6 Ink Unit Removal
NOTE: Ink Unit consists of the Pump Unit, Cleaner Head, and Cap Assembly.
1.
Remove HOUSING. (Refer to Section 4.2.1.)
2.
Remove the Panel Unit. (Refer to Section 4.2.3.)
3.
Remove SHEET, INK STOPPER.
SHEET, INK STOPPER
Figure 4-13. SHEET, INK STOPPER Removal
4.
Remove TRAY, ABSORBER ASSEMBLY. (Refer to Section 4.2.5.)
5.
Remove the three screws (CBS, 3x6) securing the Ink Unit to the FRAME,
MIDDLE.
6.
Remove 3 screws (CBS, 3x6) securing the Ink Unit to FRAME, TOP. Then
remove the Ink System Assembly.
7.
Release the hook fixing the Cap Assembly to the Ink Unit, and then remove the
Cap Assembly.
8.
Disconnect the tube from the Cap Assembly.
DISASSEMBLY AND ASSEMBLY
FRAME, MIDDLE
CBS (3x6)
Disassembly Procedures
CBS (3x6)
FRAME, TOP
Ink Unit
CBS (3x6)
Hook in the Cap Assembly
Figure 4-14. Ink Unit Removal
Revision C
91