Ink Unit Removal - Epson Stylus PHOTO 2000P Service Manual

EPSON Stylus PHOTO 2000P

4.2.6 Ink Unit Removal

NOTE: Ink Unit consists of the Pump Unit, Cleaner Head, and Cap Assembly.
1. Remove HOUSING. (Refer to Section 4.2.1.)
2. Remove the Panel Unit. (Refer to Section 4.2.3.)
3. Remove TRAY, ABSORBER ASSEMBLY. (Refer to Section 4.2.5.)
4. Remove the three screws (CBS, 3x6) securing the Ink Unit to the
FRAME, MIDDLE.
5. Remove the one screw (CBS, 3x6) securing the Ink Unit to FRAME,
TOP. Then remove the Ink System Assembly.
6. Release the hook fixing the Cap Assembly to the Ink Unit, and then
remove the Cap Assembly.
7. Disconnect the tube from the Cap Assembly.
DISASSEMBLY AND ASSEMBLY
FRAME, MIDDLE
CBS (3x6)
Disassembly Procedures
CBS (3x6)
FRAME, TOP
Ink Unit
CBS (3x6)
Hook in the Cap Assembly
Figure 4-14. Ink Unit Removal
Revision A
91