Check Present Data; Change Data - Epson Stylus PHOTO 2000P Service Manual

EPSON Stylus PHOTO 2000P

5.2.4.2 Check Present Data

1. Start the service program and get to the main menu.
2. Select Head voltage ID input from the main menu. The Head voltage
ID input window appears.
Figure 5-9. Head Voltage ID Input Menu
3. Select Check present data and click
EEPROM appears as in the example below:
Figure 5-10. Check Present Data Window
ADJUSTMENT
. The head ID read from the
OK
Adjustment

5.2.4.3 Change Data

1. Start the service program and get to the main menu.
2. Select Head voltage ID input from the menu. The head voltage ID
input window appears. (See Figure 5-9.)
3. Select Change data and click
4. Type the head ID and click
OK
window:
Type the head ID here.
Head ID is displayed here.
Figure 5-11. Change Data Window
The ID input to EEPROM is not effective until the printer is
C A U T I O N
next turned on.
Revision A
OK . The change data window appears.
. You see the typed head ID in the small
127