Eeprom Data Check; Changing Eeprom Data - Epson Stylus PHOTO 890 Service Manual

EPSON Stylus Photo 890/1280/1290

5.3.8.2 EEPROM Data Check

1. Start the program and input all the required information on the initial window.
Then the main menu appears on the screen. (See 5.2.4.1"Adjusting Program Initial
Setting" on page -128)
2. Select Appendix Items.
3. The Appendix Items window appears. Select EEPROM Data.
Figure 5-53. EEPROM Data Selection
4. Input the reading start address and end address. Click OK.
Figure 5-54. Reading Start/End Address Input
ADJUSTMENT
5. The information of the designated address is displayed as follows.
6. Click Previous twice to return to the EEPROM Data window.
7. To exit or continue the program, click Quit on the lower left on the window.
(Refer to Figure 5-17."Exit Window" on page -131.)

5.3.8.3 Changing EEPROM Data

1. Start the program and input all the required information on the initial window.
Then the main menu appears on the screen. (See 5.2.4.1"Adjusting Program Initial
Setting" on page -128)
2. Select Appendix Items.
3. The Appendix Items window appears. Select EEPROM Data.
Individual Adjustment Program
Figure 5-55. EEPROM Data Displayed
Revision C
146