EPSON Stylus Photo 890/1280/1290
4.2.1 HOUSING Removal
Since the printer mechanism itself structures the bottom part, it appears just by
removing HOUSING.
1.
Open the printer cover and set the PG adjustment lever to (+).
2.
Remove the four screws (CBS, 3x10) securing HOUSING, and remove it.
C A U T I O N
When removing HOUSING, push it to the rear a little first, and
then lift it up.
n
When installing HOUSING, make sure the PG
C H E C K
adjustment lever is set to (+).
P O I N T
n
After assembling HOUSING, ensure the head FFC is
not caught in the back of HOUSING.
DISASSEMBLY AND ASSEMBLY
Disassembly Procedures
CBS (3x10)
CBS (3x10)
Figure 4-2. HOUSING Removal
Revision C
83