Overview; Precaution For Disassembling The Printer - Epson Stylus PHOTO 890 Service Manual

EPSON Stylus Photo 890/1280/1290

4.1 Overview

This chapter describes procedures for disassembling the main components of the
EPSON Stylus Photo 890/1280/1290. Unless otherwise specified, disassembly units or
components can be reassembled by reversing the disassembly procedure. Therefore, no
assembly procedures are included in this chapter. Precautions for any disassembly or
assembly procedure are described under the heading "CAUTION" and "CHECK
POINT". Any adjustments required after disassembling the units are described under
the heading "REQUIRED ADJUSTMENT".
DISASSEMBLY AND ASSEMBLY

4.1.1 Precaution for Disassembling the Printer

See the precautions given under the heading "WARNING" and."CAUTION" in this
section when disassembling or assembling EPSON Stylus Photo 890/1280/1290.
n
Disconnect the power cable before disassembling or
W A R N I N G
assembling the printer.
n If you need to work on the printer with power applied,
strictly follow the instructions in this manual.
n
Wear protective goggles to protect your eyes from ink. If
ink gets in your eye, flush the eye with fresh water and
see a doctor immediately.
n
Always wear gloves for disassembly and reassembly to
avoid injury from sharp metal edges.
n
To protect sensitive microprocessors and circuitry, use
static discharge equipment, such as anti-static wrist
straps, when accessing internal components.
n
Never touch the ink or wasted ink with bare hands. If ink
comes into contact with your skin, wash it off with soap
and water immediately. If irritation occurs, contact a
physician.
Overview
Revision C
78