Q Angle Correction Image Display - Sharp IV-S30J User Manual

Setting the Operating and System Conditions
[6] angle correction image display
Select "YES" or "NO" to display a θ angle corrected
image on the operation screen.
2
SHOW
FIX IMG
A
YES
displayed on the operation screen.
A
NO
displayed on the operation screen.
Display examples
Description
angle corrected image will be
angle corrected image will not be
(Reference image)
- When the
angle correction
image display
mode has been
set to YES.
- When the
angle correction
image display
mode has been
set to NO.
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
NO
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
(Measured image)
Position of
reference image
2-8
F C1 BRT
YES
NO