Extension Functions - Sharp IV-S30J User Manual

Setting the Operating and System Conditions

[11] Extension functions

The extension function has crosshair cursor display and manual display functions.
(1) Crosshair cursor display
The crosshair cursor can be displayed on any position.
2
- "1" equals a 16-pixel line. "2" equals a full line.
- The initial coordinates of the crosshair cursor center are (256,240)
Operation procedure
1. On the "TYPE RUN COND" screen,
move the cursor to item
"
up and down keys, and press the
SET key.
2. Select "DISPLAY+CURSOR" on the
popup menu and press the SET
key.
3. Press the SET key on the
"
select "1" or "2" on the popup menu.
Then press the SET key.
4. Select "
COORD" and press the SET key.
Now, the crosshair appear on the
screen. Move the crosshair cursor
using the up/down/left/right arrow
keys. (It moves one pixel at a time)
5. When the cursor is positioned
where you want it, press the SET
key to confirm the position.
If you select "
can display two cursors when you output monitor
images from Cameras 1 and 2.
EXTENSION FUNC." using the
DISPLAY+CURSOR 1" line and
CROSS CURSOR
DISPLAY+CURSOR 2," you
[Display example]
(TYPE00)AREA1
MEAS ms
MEASURE 0 CAM1 POSI DEVIATION
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
Displays two crosshair cursors.
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTURE IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
5SHOW BINARY IMG
6SHOW
FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
0THROUGH DISPLAY
qEXTENSION FUNC.
wDISPLAY+CURSOR 1
eCLOSS CURSOR COORD
rDISPLAY+CURSOR 2
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
2-12
F C1 BRT
CAM1
PARTIAL-IMG
YES(NUMERIC)
YES
YES
YES
YES
NO
NO
NO
DISPLAY+CURSOR
SET
NO