Method For Selecting The Menu Configuration - Sharp IV-S30J User Manual

Setting and Operating Outline

1-2 Method for selecting the menu configuration

1
(1) Set wizard
The IV-S30J has a "Set Wizard" function to assist beginners in setting the measurement conditions.
Select "SET WIZARD" from the "MAIN MENU" and the wizard will show the items
needed for each step. You only need to make selections according the instructions
on the screen. Using the wizard, you can establish the minimum required settings
for making measurements.
STEP1
SELECT THE MEASUREMENT
START INPUT I/F
1PARALLEL+SERIAL
2TRIG CCD START
NEXT DETAIL
The steps that the set wizard takes you through are displayed
as lists on the "operation chart." At any point you can return to
the previous step to make a change if you want to.
Wizard
The "Wizard" is a program that helps users make settings for measurement operations easily and
without making mistakes. The controller asks you a series of questions at each step and you
simply answer these to complete the settings.
The wizard is convenient for making settings when beginners and inexperienced operators are
operating the machine. However, operators who are familiar with the operation may save a lot of
time by using other setting methods.
1PARTIAL-IMG
2ALL IMAGE
3NO CAPTURED
ENTER A SHUTTER SPEED
(1/30 1/10000)
1SHUTTER SPEED
1/00060
1-2
IVS30J
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
STEP9
1NO
2YES
TYPE00
Start
STEP1:PARALLEL+SERIAL
STEP2:CAPTURE IMG/PARTIAL-IMG
STEP3:MEAS1/CAM1
STEP4:MEAS1/BIN-AREA
STEP5:MEAS1/WINDOW/MASK,1
STEP6:MEAS1/MEAS CND
STEP7:MEAS1/EVALUATION
STEP8:MEAS1/CALC
STEP9:MEAS1/OUT
STEP10:FINAL NUMERIC CALC
STEP11:FINAL OUTPUT COND
STEP12:SERIAL OUTPUT/ANY
STEP13:OPS MENU COND
STEP14:CALIBRATION/YES
STEP15:MOVE ALL WINDOW/YES
STEP16:TITLE/YES
End