Setting For Serial Communications - Sharp IV-S30J User Manual

16-4 Setting for serial communications

When "PARALLEL+SERIAL" (general purpose serial) has been specified in item "
on the "I/O CONDITIONS" menu (page 16-1), and when "SERIAL" or "PC-LINK" has been specified
in item " OUT I/F (PARAL.)" the serial communication conditions must be set on the "COMM.SET"
screen.
Set the items to match the communication conditions of the other device.
Select "MAIN COND" -> "SYS-CND" ->
"COMM.SET," in that order.
How to set the communication settings
Adjust each item to match the equipment used
to communicate.
COMM. STANDARD
Select "RS232C," "RS422:4LINE," or
"RS422:2LINE."
BAUDRATE (kbps)
Set the communication speed: 2.4 Kbps, 4.8
Kbps, 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 57.6
Kbps, or 115.2 Kbps.
NO.OF DATA BITS
Select either 7-bit or 8-bit.
PARITY CHECK
Select "EVEN," "ODD," or "NO."
NO.OF STOP BITS
Set it to 1-bit or 2-bits.
STATION NO.
Select the station number for communication using the up and down arrow keys.
Setting the Input/Output Conditions
SELECT SYSTEM COND
SYS-CND
I/O CONDITIONS
COMM.SET
COMPUTER LINK
GAIN-OFFSET
SET=TO=NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COMM.SET SCREEN COND SAVE
1COMM.STANDARD
RS232C
2BAUDRATE(k.bps)
115.2
3NO. OF DATE BITS
7BIT
4PARITY CHECK
EVEN
5NO. OF STOP BITS
2BIT
6STATION NO.
00(0~7F)
2BIT
1BIT
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
16-21
MEAS INP I/F"
F C1 BRT
1COMM.STANDARD
2BAUDRATE(k.bps)
3NO. OF DATE BITS
4PARITY CHECK
5NO. OF STOP BITS
6STATION NO.
F C1 BRT
RS232C
RS422:4LINE
RS422:2LINE
7BIT
8BIT
2.4
EVEN
4.8
ODD
9.6
NO
19.2
38.4
57.6
115.2
16