Optional Network Board Driver - NEC Express5800 User Manual

5-48 Installing the Operating System with Express Setup

Optional Network Board Driver

If you want to use optional Network Board (N8104-111/112/119/120/121/125/126), the network
driver will be installed automatically. Therefore, the driver attached to the Network board should not
be used.
If you want to use optional Network Board (N8104-111), install the driver stored in NEC
EXPRESSBUILDER DVD.
In case of using (N8104-111)
"\011\win\winnt\dotnet\dl3\pro100\win32"
In case of using (N8104-112/119/120/121/125/126)
"\011\win\winnt\dotnet\dl3\pro1000\win32"
If the procedure of installation is not clear, refer to the installation procedure described in the
section "Installation of the Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel(R) PRO/1000...)] is the name of On-Board adapter. All
other names show the Optional Network Board.
3.
Click [Driver] tab and click [Update Driver...]. [Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and uncheck the
[Search removable media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [(N8104-111)],
specify
[\011\win\winnt\dotnet\dl3\pro100\win32].
Then click [Next].
When using [(N8104-112/119/120/121/125/126)], specify
[\011\win\winnt\dotnet\dl3\pro1000\win32].
Then click [Next].
7.
Click [Finish].
8.
Reboot the system.