NEC Express5800 User Manual page 406

F-10 Installing Windows Server 2003
11.
<In case using N8103-95>
Press S.
When the screen of Step 6 is displayed, press Enter to go to Step 12.
<In case not using N8103-95>
Press Enter to go to Step 13.
12.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra160 SCSI Cards (Win Server 2003)] and press Enter.
IMPORTANT:
the N8103-95 SCSI controller, press S.
The screen of Step 5 is displayed.
Press Enter to go to Step 13.
13.
When the following message is shown, press Enter to start "Welcome to Setup".
IMPORTANT:
larger than 2,097,152MB(2TB), you can specify only a value equal to
or less than 2,097,152MB as partition size.
14.
When the installation of Windows Server 2003 has finished, the system reboots
automatically.
– Windows Server 2003 has been installed: Go to the step 18.
– Windows Server 2003 R2 has been installed: Go to the step 15.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 160 SCSI Cards (Win Server
2003)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.
If you install Windows Server 2003 on the hard disk