Configuration Examples - NEC Express5800 User Manual

Configuration Examples

The following describes examples of configuration required to use software-link features or for
system operations.
Time and Date Settings
You can also change the time and date settings via the operating system commands.
Select [Main] - [System Time].
Select [Main] - [System Date].
Link with Management Software
To control power supply of the server with NEC ESMPRO Manager via the network
Select [Advanced] - [Advanced Chipset Control] - [Wake On LAN/PME] - [Enabled].
Select [Server] - [AC LINK] - [Stay Off].
UPS
To link power supply with the UPS
To power on the server when power is supply from the UPS
Select [Server] - [AC LINK] - [Power On].
To keep the server off-powered even when power is supplied from the UPS
Select [Server] - [AC LINK] - [Stay Off].
Boot
To check the boot order
Select [Boot] and check the current boot order.
To change the boot order of devices connected to the server
Select [Boot] and specify the boot order.
IMPORTANT:
run BIOS Setup menu to check the boot priority on [Boot] menu. If the
bootable device is displayed in "Excluded from boot order", put the
cursor onto the device, then press x to move it to "Boot priority order".
If you have installed any bootable device, be sure to
Configuring Your Server 4-5