Configuration Examples - NEC Express5800 series User Manual

4-4 Configuring Your Server

Configuration Examples

The following describes examples of configuration required to use software-link features or for
system operations.
Date and Time
To change system date or time
Select [Main] - [System Date] and [System Time].
Link with Management Software
To control power supply of the server with NEC ESMPRO Manager via the network
Select [Advanced] - [Advanced Chipset Control] - [Wake On LAN] - [Enabled].
Boot
To change the boot order of devices connected to the server
Select [Boot] and specify the boot order.
To display POST check results
Select [Advanced] - [Boot-time Diagnostic Screen] - [Enabled].
You can also press Esc while the NEC logo is on the screen to display POST check
results.
To use remote wake-up feature
Via Modem:
[Advanced] → [Advanced Chipset Control] → [Wake on Ring] → [Enabled]
Via LAN:
[Advanced] → [Advanced Chipset Control] → [Wake on LAN/PME] → [Enabled]
Via Additional option slot card:
[Advanced] → [Advanced Chipset Control] → [Wake on LAN/PME] → [Enabled]
Via RTC alarm:
[Advanced] → [Advanced Chipset Control] → [Wake on RTC Alarm] → [Enabled]
To control from the HW console
Select [Server] - [Console Redirection] and set each item.