NEC Express5800 series User Manual page 33

7 ID lamp (blue)
The lamp is intended to identify the CPU blade in the system. The lamp is lit by a switch or
software command.
When the recognize command is received from software, the lamp blinks. If you press the ID
switch, the lamp lights.
8 Combo connector
This connector sends or receives various signals.
The separately priced K410-135(00) or blade switching cable (A/B) provided with the
N8405-013F is connected to this connector.
9 Eject lever
Pull the lever toward you to remove the CPU blade from the Blade Assembly Unit.
10 POWER/SLEEP lamp (green)
The lamp lights green when the power is turned on. It blinks when the system has entered a
sleep state.
11 STATUS lamp (green/amber)
The lamp indicates the status of the CPU blade. See "Lamp Indications" described later for
the indications and meanings of the lamp.
General Description 2-7