Local Installation - NEC Express5800 series User Manual

5-2 Installing the Operating System

Local Installation

Before the installation, make sure that the CPU blade is connected with the keyboard, display unit,
CD-ROM drive and floppy disk drive. If this is not the case, connect these devices to the CPU
blade.
Notes
Before starting the local installation, read the notes described here carefully.
Key entry
Conduct key entries while the access lamp on the USB floppy disk drive is off (or the
floppy disk is not accessed).
System update
If the system configuration is modified, always provide the system update by using
CD-ROM "NEC EXPRESSBUILDER" shipped with the system. See Chapter 6 for
details.
Re-installation to dynamic disk
In the re-installation to the hard disk drive upgraded to a dynamic disk, one or more
partitions other than the partition in which the OS is to be installed may exist and you may
desire to leave the partitions. If so, note the followings.
<Example>
– For the partition in which the OS will be installed, select the partition in which the OS
has been installed previously.
– Select "Use current file system as it is (no change)" for the format of the OS partition.
(C:)
XX.XX GB NTFS
Normal (System)
System
(D:)
XX.XX GB NTFS
Normal
Data area (when leaving this partition is
desired.)