NEC Express5800 series User Manual page 90

4-24 Configuring Your Server
Boot
If you move the cursor to the position of "Boot," the Boot menu appears, which is used to set the
boot priority.
The CPU blade tries to boot from the devices in the order specified in this menu. When the boot
software is found, the CPU blade starts the software.
The priority of the boot devices can be changed by using the ↑, ↓, +, and - keys. Move the cursor to
the desired device with the ↑ or ↓ key and change the priority with the + or - key.
IMPORTANT:
following order. To boot NEC EXPRESSBUILDER, set the priority of
the devices as shown below.
CD-ROM Drive
Removable Device
IBA GE Slot 0320 v1216
Hard Drive
IBA GE Slot 0321 v1216
The boot device priority is factory-set in the
(USB CD-ROM)
(USB floppy disk drive)
(LAN 1)
(Hard disk drive)
(LAN 2)