NEC Express5800 series User Manual page 80

4-14 Configuring Your Server
Peripheral Configuration
Select "Peripheral Configuration" on the Advanced menu to display the following screen.
Available options in the Peripheral Configuration menu are listed below.
IMPORTANT:
requests or the base I/O addresses. If an assigned value is already used
by another resource, it appears in yellow. Any yellow value must be
re-assigned.
Option
Serial Port B
Base I/O Address
Interrupt
PS/2 Mouse
Make sure to avoid any conflict in the interrupt
Parameter Description
[Disabled] Specify whether the serial port B is
enabled or disabled.
Enabled
3F8 Specify the base I/O address for the
serial port B.
[2F8]
3E8
2E8
[IRQ 3] Specify the interrupt for a serial port B.
IRQ 4
Disabled Specify whether the mouse is enabled
or disabled.
[Enabled]
Your Setting
[ ]: Factory-set