NEC Express5800 series User Manual page 32

2-6 General Description
Front Panel
1 POWER switch
The switch is intended to turn on or off the power of the CPU blade itself. Pressing the switch
for 4 seconds or longer causes the power supply to be turned off forcibly. Pressing the
switch in the power saving mode (with the POWER/SLEEP lamp blinking) returns the power
supply to the normal state.
2 DUMP switch
Press this switch to run the memory dump.
3 RESET switch
Press this switch to reset the CPU blade.
4 ID switch
Press this switch to turn on or off the ID lamp. Pressing this switch notifies the management
PC that the CPU blade to be maintained is identified.
5 LAN1 Link/Access lamp (green)
The lamp lights when LAN port 1 is connected to the network. The lamp blinks when data is
being transmitted.
6 LAN2 Link/Access lamp (green)
The lamp lights when LAN port 2 is connected to the network. The lamp blinks when data is
being transmitted.
10
11
1
2
3
4
5
6
7
8
9