Graphics Accelerator Driver
If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
NOTE:
The graphics accelerator driver is supported only on a server running a
full installation. Use VGA on a server running a Server Core
installation.
Please follow the following procedure when you want to reinstall the driver individually.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "setup.exe" in the following directory.
– Windows Server 2008 64-bit (x64) Edition:
\011\win\winnt\ws2008x64\video\setup
– Windows Server 2008 32-bit (x86) Edition:
\011\win\winnt\ws2008\video\setup
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, restart the
system.
Installing SCSI Controller Driver (N8103-75/95/107)
If you use the SCSI Controller N8103-75/95/107, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing SAS Controller Driver (N8103-104A)
If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
<Windows Server 2008>
Installing Windows Server 2008 D-37