NEC Express5800 User Manual page 82

4-22 Configuring Your Server
Security Chip Configuration
Selecting "Security Chip Configuration" on the Security menu shows the following screen. The
screen shows when [TPM Support] is set to [Enabled].
See the table below for the items.
Option
TPM Support
Current TPM State
Change TPM
State
Parameter
[Disabled]
Enabled
–
[No Change]
Enable & Activate
Deactivate & Disable
Clear
Description
Specify whether the TPM (Trusted
Platform Module) is enabled or
disabled.
This menu appears only when
"Enabled" is selected in [TPM
Support].
Indicates the TPM State currently
being set. (Display only)
This menu appears only when
"Enabled" is selected in [TPM
Support].
Select [Enable & Activate] to use
the TPM features.
If you change parameter for this
item, a confirmation screen
appears at the end of POST after
restarting the system. Select
[Execute] on the confirmation
screen.
Your Setting
[ ]: Factory-set