NEC Express5800 User Manual page 301

13.
Connect the interface cable and power cable to the floppy disk drive.
See Chapter 10 for cable connection.
14.
Install components and connect cables which were removed in Steps 1 through 3.
15.
Change setting for floppy disk drive on BIOS Setup menu.
1) Select [Main] → [Legacy Diskette A:], and select [1.44/1.25 MB 31/2"]. Then select
[Exit] → [Exit Saving Changes], and restart the server.
2) Run BIOS Setup menu and select the [Boot] menu. Put the cursor onto "Legacy
Floppy Drives" under "Excluded from boot order", and press x to move it to "Boot
priority order". Then, press + to move the item to the desired priority order.
* The position next to "CD-ROM" is recommendable.
Removal
The floppy disk drive can be removed in the reverse order of the installation.
Upgrading Your Server 9-45