NEC Express5800 User Manual page 374

E-8 Installing Windows Server 2003 x64 Editions
7.
Select the [Intel(R) ICH9 SATA AHCI Controller (Desktop/Server/Workstation)] and
press Enter.
The screen of Step 5 is displayed.
– If the RAID Controller N8103-109/N8103-116A/117A is used:
Press S.
The screen of Step 6 is displayed. Press Enter, and go to Step 8.
– If the Internal RAID Controller N8103-109/N8103-116A/117A is not used:
Go to Step 9.
8.
Select the proper RAID Controller and press Enter.
The screen of Step 5 is displayed.
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 for x64)]
(When N8103-116A/117A RAID Controller is installed.)
– [Promise SuperTrak EX Family Controller -64bits platform]
(When N8103-109 RAID Controller is installed.)
– [LSI Embedded MegaRAID (Windows XP/2003 64-bit)]
(When Onboard RAID Controller (LSI Embedded MegaRAID) is used.)
9.
<In case using N8103-75/107>
Press S.
When the screen of Step 6 is displayed, press Enter to go to Step 10.
<In case not using N8103-75/107>
Press Enter to go to Step 11.
10.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 64-bit)] and press Enter.
IMPORTANT:
the N8103-75/107 SCSI controller, press S.
The screen of Step 5 is displayed.
Press Enter to go to Step 11.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 320 SCSI Cards
(Windows64-bit)"
Unless the device manufacturer prefers that
you usethe driver on the floppy disk, you
should use the driver in Windows.