Items To Be Prepared By The User; Power Supply - Hitachi L-2100 Instruction Manual

2.3

Items to be Prepared by the User

2.3 Items to be Prepared by the User

2.3.1 Power Supply

(1) Power voltage : 100 to 240 V AC
(2) Frequency : 50 or 60 Hz
(3) Power
consumption : 500 VA or more in total system
(4) Grounding : Grounding connection of Electric
Ground Properly to Prevent Electric Shock Hazard!
• Be sure to use the power cable supplied with the
instrument. Use of a different power cable could result in
an electric shock hazard.
• This instrument is of a "plug-connected type" specified in
European Norm EN61010-1, so connect the power cable to
a grounded three-wire outlet.
• If a grounded three-wire outlet is not available, the power
cable may be connected to a two-wire outlet through an
adapter plug. In this case, be sure to provide proper
grounding connection as required.
2 - 4
Fluctuation .......Within ±10% with respect
to rated voltage
Fluctuation .......Within ±0.5 Hz with respect
to rated frequency
Provide power supply sufficient for
combinational use with other devices.
Installation Technical Standard Class 3 or
higher should be provided.
WARNING